Q&A

Latest Update : Dec.7, 2020

Back to Financial Results (FY3/2021)

Investor Meeting Presentation for 2Q FY 3/2021 held on November 6, 2020

* Some parts have been added and modified for a clearer understanding.

Question

Question and Answer

It may have sounded like we haven't included positive factors, but there are always accounting differences as you pointed out. Parts for automobiles did better than anticipated, recovering since around July, and bearings could break records. On the other hand, we deliver to a wide range of customers, so there are quite a few negative factors as well, including textile machinery, office automation equipment, and smartphones for the specific customer in China. This time, we were conservative and set the forecast at 50 billion yen, but bearings forecast, for example, go up and down every month, and demand is currently fluctuating significantly. The yen is also appreciating, so this makes precise forecasts difficult. Looking at the big picture under these circumstances, I think it's probably best to be conservative.
Yes, that's right. In these times where we don't know what's going to happen, we believe we should implement a strategy that addresses risk rather than thinking about 1 or 2 billion yen and going overboard right now to avoid adjusting inventory levels downward. There's also the problem (with the trade friction) between the United States and China, and we can't predict what's going to happen next year. As such, we believe that when we can reduce bearing inventory, we should, taking fiscal discipline into account.
Yes, that's right. We have implemented various measures for bearings, but we have not been able to go on business trips up to now. This has made it difficult to talk face to face and communicate our thinking. We have been doing what we can, using DX tools and the like, but we hope now to implement thorough cost reductions, including ideas that we have been incubating up to now.
There have been various reports about LED backlights, but we have not been able to fully confirm whether new models or cheaper models will sell more. As for camera actuators, we have had no manufacturing problems whatsoever, and things are going better than planned.
We have carefully reviewed the most recent forecasts to produce our earnings forecast, and it includes the impact of COVID-19, so we have added stress from the standpoint of demand. However, we do not expect to have costs such as loss of time in the second half like we did in the first. There are lock downs in Europe and the United States, but our assumption is that we will basically be able to continue plant production activities.
Yes, that's right.
In regard to parts supplied for a fee, in the second quarter, it came to around 40 billion yen. In the third quarter we expect it to be around 32 billion yen, and in the fourth quarter, we expect it to be around 10 billion yen. As for the factors behind the increased income, the biggest thing was game production peaking. Next was the strong showing by semiconductors at both Mitsumi and ABLIC. Finally, there was a big decline in optical devices for the Chinese customer, but we got off to a strong start with our North American customer. We anticipate that this trend will continue into and peak in the third quarter. Games will be down slightly in the third quarter, but we expect to maintain a very high level of production.
External sales volumes for July, August, and September were 183, 188, and 214 million units, respectively. Internal sales volumes were 55, 52, and 47 million units, respectively. The production volumes were 240, 247, and 242 million units, respectively. As for the most recent forecasts for October and onward, we expect external sales volumes of 211 million units in October, 217-218 million units in November, and 207 million units in December for an average of 212 million units, which is slightly higher than the 210 million units you see in the material. The average internal sales volume will be 55 million units, and the production volume will exceed 250 million units. In regard to production volume, we will look into controlling it along with some inventory adjustments.
There were some deliveries in the first quarter, but production has been significantly throttled back since the second quarter, and we anticipate that this trend will continue in the third and fourth quarters. There was some front loading with semiconductors, but it is assumed that our camera actuators are installed in certain high-end models, so there was no particular front loading in that regard, and that was one factor behind the drop in revenue.
I cannot comment on our view of the share, but nothing in particular has changed.
Operations are normal. We do not have any problems with processing or assembly. ABLIC does their assembly in Akita, so we want to build that up more from the standpoint of BCP. We have had a tremendous volume of inquiries from customers, and that is boosting our performance. We expect this trend to continue for some time.
We will put every effort into fulfilling our responsibility to provide our customers with a stable supply.
In the second quarter, sales of rod-ends for aircraft dropped, and that was one of the factors working to decrease profit. Income also dropped in conjunction with the decline in sales of parts for aircraft included within ball bearings. However, the miniature ball bearing production volume is growing, and profitability remains the same. In the second half, aircraft components will be mostly flat, but external sales are growing, so we believe the numbers in this forecast are conservative.
The unit selling price is high for new products, including purchased components. The per unit profit margin is smaller, but there is no change in the aim of offering higher added value per unit. Next year, I think we will definitely have more business opportunities, including the upcoming change in the model mix and the number of built-in components. Outside of our North American customer, unfortunately, the market for very high-performance components for flagship manufacturers has disappeared, but we expect there to be an increase in new plans next year and onward with other customers. When that is taken into account, I believe there is plenty of room for growth next year.
We expect analog semiconductors, including ABLIC's, to continue growing significantly next year. We also believe that power supply components and connectors will bring in solid increases in income. Whether we could make up entirely for a hypothetical decrease in games depends on the amount of the decrease, so it's uncertain, but I believe that the results of the Eight Spears basic strategy that we have been implementing, including in other businesses, would manifest so that we would make up for it.
I cannot comment on whether we would bring parts manufacturing in-house, but we will work on increasing the profit margin in many ways. As for the Chinese customer, if that possibility arose, I think we would be able to be a part of it as well.
At this stage, we haven't yet discussed it.
There has been a significant impact on the amount of profit.
I have heard that once the operating rate gets above 85% for semiconductors it would be difficult to go any higher. Right now it's just above 80%. We also outsource production, so there is still capacity. It depends on the product mix as well, but we already have a plan for next year that lays out what we will outsource and what we will produce in-house, so just know that these will be brought into it.
The custom products to which you refer are a sub-core business of our company, and we are prepared to adapt to changes in technology and other developments. Even if we were not able to adapt to such changes, we are involved right now because they are sufficiently profitable.
Our policy is to control the overall percentage and grow our core businesses or the Eight Spears as much as possible. We took a big hit, but rather than responding by withdrawing from our sub-core businesses, we hope to keep them to around 20% of the whole. Custom products have their risk, but on the other hand, they are worth it for the very high added value. However, if we were to only focus on these products, the risk would be too high, so our basic strategy is to grow the Eight Spears.
Ball bearings for automobiles bottomed out in May, and by October they had recovered to a record high. Conversely, ball bearings for fan motors hit a record high in May, and since then they have decelerated and remained flat due to the trade friction between China and the United States. Ball bearings for other uses mostly bottomed out in May, and from September to October, some have reached record highs. There were some likely impacted by stay-at-home demand, such as fishing reels and power tools.
If there is no recovery in aircraft, we will be in trouble. Overall, there would be a significant impact. External sales of bearings are increasing, but internal sales are struggling due to the decrease in pivots. Overall, we have entered a transitional period.
We believe that external sales will continue growing. Ball bearings for fan motors are down compared to the peak, so we see room for growth. If that exceeds the drop in internal sales due to the decrease in pivots, we will be able to increase overall production, which will increase our earning power. On the other hand, this fiscal year our policy is to purposely decrease inventory, so I think production will increase midway through the fourth quarter, but for the time being, we are consciously avoiding ramping up production.

Go back to top of this page

Follow Us

Twitter Youtube